# Create a one-off email campaign

> Build a one-off campaign under Campaigns › One Off by naming it, picking an email, choosing the scope and target segment, setting the launch options and goal, and saving it as a draft.

A **one-off campaign** sends one message to one segment, once. You build it, save it as a draft and launch it when you are ready. This guide creates a draft email campaign for everyone who bought in the last 30 days. It does not launch it. For what the three campaign modes do and what happens at launch, read [How campaigns work](https://releva.ai/documentation/learn/campaigns/how-campaigns-work/).

[**Get started**](https://releva.ai/documentation/guides/get-started/get-started-with-releva/) · Step 4 of 6

1. [Welcome](https://releva.ai/documentation/guides/get-started/get-started-with-releva/)
2. [Confirm your brand](https://releva.ai/documentation/guides/brand-identity/set-up-your-brand-identity/)
3. [Set up your email sender](https://releva.ai/documentation/guides/messaging/set-up-your-email-sender-and-dns-records/)
4. Send your first campaign (this page)
5. [Create your first segment](https://releva.ai/documentation/guides/segments/create-a-segment/)
6. [Measure the results](https://releva.ai/documentation/guides/analytics/check-how-your-store-is-doing/)

[Previous step: Set up your email sender](https://releva.ai/documentation/guides/messaging/set-up-your-email-sender-and-dns-records/)

[Next step: Create your first segment](https://releva.ai/documentation/guides/segments/create-a-segment/)

## Before you start

* You have a saved email under **Marketing Channels › Emails**. A campaign does not build the email; it only picks one. See [How emails work](https://releva.ai/documentation/learn/emails/how-emails-work/).
* You have a **Behavior** segment with the people who should receive it. See [Create a segment](https://releva.ai/documentation/guides/segments/create-a-segment/).
* Your sender domain has its click-tracking and DKIM DNS records in place. **Launch** stays disabled until the click-tracking record is verified, and emails are not sent until DKIM is verified. The values to add are under **Settings › Messaging**.
* Your plan includes one-off campaigns. If **New Campaign** shows a lock, ask your account owner to unlock it.

## Steps

1. Go to **Campaigns › One Off**.

   ![Step 1](https://releva.ai/documentation/_astro/step-1.C7MpiFpb_1cWU0R.webp)

2. Select **New Campaign**.

   The form opens on its **Content** tab with a generated name and the goal **Purchases** already set.

   ![Step 2](https://releva.ai/documentation/_astro/step-2.OJLbtIAm_Zi6pfv.webp)

3. In **Name**, replace the generated name with one you will recognise in the campaign list.

   Names must be unique in the shop. **Save & close** stays disabled while the name is empty.

   ![Step 3](https://releva.ai/documentation/_astro/step-3.BFWWZ9Vv_Z11w5fl.webp)

4. Optional. In **Campaign Tags**, type a tag and press Enter. Tags help you group and find campaigns later.

   A tag you type for the first time is added to the shop’s tag list.

   ![Step 4](https://releva.ai/documentation/_astro/step-4.APVyjWuZ_Z1AIVMl.webp)

5. Under **Message**, keep **Email**, then choose the email to send from the **Email** list. Its preview appears below.

   Each entry reads `<name> (subject: <subject>)`. Before you pick an email, the button next to **Edit** reads **New** and creates a new email. Once you have picked one, **Edit** opens it in the editor and **Duplicate & Edit** makes a copy to change for this campaign only. A one-off can send a **Facebook Ad** instead of an email: see [Create a Facebook ad](https://releva.ai/documentation/guides/facebook-ads/create-a-facebook-ad/).

   ![Step 5](https://releva.ai/documentation/_astro/step-5.BXGxi4z7_24GcqR.webp)

6. On **Audience**, keep **Campaign Scope** on **Opt-in Marketing** for a marketing message, and choose the **Target Segment** that should receive it.

   **Opt-in Marketing** sends only to subscribed profiles. **Opt-out Marketing** sends to everyone who has not unsubscribed. **Transactional** ignores subscription status and is for order and account messages only. Next to the segment you see how many profiles it holds and how many of them can get email, SMS, push, Facebook and Google messages. The segment is evaluated again when you launch.

   ![Step 6](https://releva.ai/documentation/_astro/step-6.CANO2g7N_Z12N4M.webp)

7. On **Launch Configuration**, turn on **Scheduled Execution** to start at a set date and time, or leave it off to start when you launch. Turn on **Send at Optimal Time** to send to each person when they are most likely to engage.

   With **Scheduled Execution** on, you still have to select **Launch** on the list; the campaign then waits for the date. **Send at Optimal Time** spreads sending over up to 24 hours and overrides the shop’s quiet hours for this campaign.

   ![Step 7](https://releva.ai/documentation/_astro/step-7.Vgd_akUh_1XyY2P.webp)

8. On **Goal**, check the goal Releva reports for this campaign. **Purchases** with **Revenue Tracking** is set for you. Select **Add goal** to track up to three.

   A goal is a name plus the events that count as reaching it. **Purchases** counts the shop’s checkout event (**Cart Checkout Completed**). Goal names must be filled in and unique.

   ![Step 8](https://releva.ai/documentation/_astro/step-8.BaM8TOPl_3xPSP.webp)

9. Select **Save & close**.

   ![Step 9](https://releva.ai/documentation/_astro/step-9.D7Dj4rjI_2oTeEl.webp)

10. Your campaign is saved as a draft at the top of the list. Nothing is sent until you select **Launch**.

    ![Step 10](https://releva.ai/documentation/_astro/step-10.COeGPMSD_ZYa3ML.webp)

## Check it worked

* The new campaign is the first card on the **One Off** list, with the segment’s name as a badge, an email icon and a **Launch** button on the right.
* The card’s counters (**Sent**, **Delivered**, **Clicks**, **Purchases**, **Bounces**, **Unsubscribes**) are all 0: the draft has not run.
* Open the card by its name: every tab still shows what you chose, and the footer has **Delete**, **Make a copy**, **Save** and **Save & close**.

When you are ready, select **Launch** on the card. The status changes to **Scheduled** (waiting for the date) or **Running**, and to **Finished** when every message is out. A running one-off can be stopped with **Abort**; it cannot be resumed afterwards.

## Troubleshooting

**Save & close is disabled.** The name is empty, no email is chosen, no segment is chosen, or a goal name is empty or repeated. Fill in the missing part.

**Saving fails with “Name must be unique!”.** Another campaign in this shop already has that name. Change the name and save again.

**Launch is greyed out and the card says “Click tracking not ready - check Click Tracking settings”.** The click-tracking DNS record for your sender domain is not verified yet. The list shows an alert with a **Shop Settings** link that opens **Settings › Messaging**. Add the record shown there and wait for the check to pass.

**The Email list is empty or shows “No emails found”.** Create the email first under **Marketing Channels › Emails**, then come back; the list only offers saved emails.

**A Calculate Segment button shows instead of the profile count.** The count could not be loaded, or the segment holds no profiles. Select **Calculate Segment** to try again. It does not affect what is saved; the segment is evaluated again at launch.

**I cannot change a campaign that was launched.** Once a one-off has been launched, finished or aborted, its fields are locked. Select **Make a copy** to start a new draft with the same settings.

## Next steps

* [How campaigns work](https://releva.ai/documentation/learn/campaigns/how-campaigns-work/): Learn what scope, target segment, launch options, statuses and goals decide.
* [Create a segment](https://releva.ai/documentation/guides/segments/create-a-segment/): Build the segment your next campaign sends to.
* [How consent works in Releva](https://releva.ai/documentation/learn/consent/how-consent-works-in-releva/): Learn which customers your campaign can reach and how the marketing opt-in works.