# Set up your email sender and DNS records

> Set the sender name, sender address and reply-to address under Settings › Messaging › Emails, then publish the two CNAME records (DKIM and click tracking) that let Releva send email and track links.

Releva sends email from an address on **your** domain. For that to work, your domain has to tell the world that Releva may send on its behalf (a **DKIM** record) and has to point a click-tracking hostname at Releva (a **click-tracking** record). Both are CNAME records that you add at your DNS provider. Until the click-tracking record is in place, no campaign on any channel can be activated; until the DKIM record is in place, emails are not sent. For the reasons behind this, read [How sender verification and click tracking work](https://releva.ai/documentation/learn/messaging/how-sender-verification-and-click-tracking-work/).

[**Get started**](https://releva.ai/documentation/guides/get-started/get-started-with-releva/) · Step 3 of 6

1. [Welcome](https://releva.ai/documentation/guides/get-started/get-started-with-releva/)
2. [Confirm your brand](https://releva.ai/documentation/guides/brand-identity/set-up-your-brand-identity/)
3. Set up your email sender (this page)
4. [Send your first campaign](https://releva.ai/documentation/guides/campaigns/create-a-one-off-email-campaign/)
5. [Create your first segment](https://releva.ai/documentation/guides/segments/create-a-segment/)
6. [Measure the results](https://releva.ai/documentation/guides/analytics/check-how-your-store-is-doing/)

[Previous step: Confirm your brand](https://releva.ai/documentation/guides/brand-identity/set-up-your-brand-identity/)

[Next step: Send your first campaign](https://releva.ai/documentation/guides/campaigns/create-a-one-off-email-campaign/)

## Before you start

* You can edit the DNS records of the domain in your sender address, or you know who can (your IT team or the agency that manages your domain).
* You have an address on your own domain to send from, for example `news@demo-store.example.com`. A Gmail, Yahoo or other mailbox-provider address cannot be verified.
* You have a reply-to mailbox that somebody reads.
* If your DNS is on Cloudflare, set each record’s proxy status to **DNS only** (grey cloud), not **Proxied**. Releva checks that the hostname resolves as a CNAME; a proxied record does not.

## Steps

1. Open **Settings › Messaging**. The **General** tab opens first.

   The **Click Tracking** card already shows the click-tracking record for your current sender domain. If the card says *Set a sender domain on the Emails tab first*, your sender address is not set yet.

   ![Step 1](https://releva.ai/documentation/_astro/step-1.DXB13wUz_Z23jrt4.webp)

2. Select the **Emails** tab.

   ![Step 2](https://releva.ai/documentation/_astro/step-2.Dldp39d1_Z1hrJd3.webp)

3. In **Email Sender Name**, enter the name your customers see in their inbox.

   ![Step 3](https://releva.ai/documentation/_astro/step-3.CeJxjdDX_bYUze.webp)

4. In **Email Sender Address**, enter the address your emails come from. Use an address on your own domain, not a Gmail or Yahoo address.

   The part after `@` is your **sender domain**. Both DNS records are built from it. Changing it later invalidates the records you published and gives you two new ones to add.

   ![Step 4](https://releva.ai/documentation/_astro/step-4.YKA0Msc4_2sKlaM.webp)

5. In **Email Reply-to Address**, enter a mailbox you read. Replies from your customers go there.

   ![Step 5](https://releva.ai/documentation/_astro/step-5.LDt6S1En_1dX5SD.webp)

6. Select **Save**. Releva creates the DNS records for the domain of your sender address.

   The **Save** button below the form, on the right, saves every tab of this page at once. It reads **Saved** while there is nothing to save.

   ![Step 6](https://releva.ai/documentation/_astro/step-6.C7IBM7-N_Z1GPNvx.webp)

7. Next to **Sender verification**, select **details…**.

   The line reads **failed** until both records resolve. The **Email Sender Verification** window opens with the two records under **Required DNS Records**.

   ![Step 7](https://releva.ai/documentation/_astro/step-7.BkgAC4YP_unLOV.webp)

8. At your DNS provider, add the first record (DKIM, type CNAME). Use the copy icons to copy its **Host** and **Value**.

   Copy the values your own admin shows; the ones in the screenshot belong to the demo shop. The **Host** looks like `<token>._domainkey.<your sender domain>`.

   ![Step 8](https://releva.ai/documentation/_astro/step-8.BChRo_r8_ZwdDxt.webp)

9. Add the second record (click tracking, type CNAME) the same way.

   Its **Host** is `click.<your sender domain>`. A red row means the record was not found at the last check; a green row means it resolves.

   ![Step 9](https://releva.ai/documentation/_astro/step-9.B6zduBTB_2fI3T4.webp)

10. When both records are published, select **Re-check DNS Records**. DNS changes can take a few hours to show up.

    Re-checking only looks up the records again. Press it as often as you like.

    ![Step 10](https://releva.ai/documentation/_astro/step-10.pIEzBBUf_Z2oYBTT.webp)

## Check it worked

* On the **Emails** tab, **Sender verification** shows a green check and **successful**.
* In the **Email Sender Verification** window, the heading reads **Required DNS Records (✓ successful)**, both rows are green, and the box under the table reads **The click-tracking host is serving** with *DNS, TLS and our link tracking are all working. Nothing to do here.* Right after the record starts resolving it may read **Nothing answered on the click-tracking host** instead; that clears on its own while the certificate is issued.
* The red *Campaign sending is disabled until the click-tracking DNS record is in place* and *Email sending is disabled until the DKIM DNS record is in place* alerts disappear from the **Campaigns**, **Emails** and other channel lists.

## Troubleshooting

**The field shows “sender name is required”, “sender email is required” or “reply to email is required”.** The field is empty. Fill it in. **Save** is not disabled by these errors, so check all three fields before you save.

**A row stays red after Re-check DNS Records.** Either the record has not propagated yet (allow a few hours), or it is published on the wrong host. Compare **Host** and **Value** character by character with what your DNS provider shows. On Cloudflare, make sure the record is **DNS only**, not **Proxied**.

**The box under the table reads “Not checked - the CNAME is not published yet”.** Releva does not probe the click-tracking host until the click-tracking record resolves. Publish it, then select **Re-check**.

**“Nothing answered on the click-tracking host”.** The record resolves, but nothing responded. Usually the TLS certificate is still being issued or the DNS change has not finished propagating. This normally clears within the hour. Contact <support@releva.ai> if it is still failing after that.

**“A different server is answering for this hostname”.** The CNAME resolves to something that is not Releva: a parked page, your own web host or a CDN. Point it at the **Value** shown in the table.

**“The click-tracking host answered that it is unhealthy”.** This is usually on Releva’s side and temporary. Wait a few minutes and re-check; if it keeps failing, contact <support@releva.ai>.

**The table says “No verification token found”.** The sender identity for your domain is missing. Contact <support@releva.ai>.

**I changed the sender address and the records are red again.** Changing the domain part of the address creates a new sender identity with a new DKIM token, so both records change. Add the new records; the old ones can be deleted. Changing only the part before `@` keeps the records.

**“Could not look up where mail for your sender domain is delivered.”** This grey note below the table is informational, and so is the **Migration status** line under it (it reports whether an older TXT-type DKIM record is still published). There is nothing for you to fix; the check runs again next time.

**My settings disappeared when I left the page.** Unsaved changes survive switching tabs but not leaving the page. Return to **Settings › Messaging** and select **Save** after editing.

## Next steps

* [How sender verification and click tracking work](https://releva.ai/documentation/learn/messaging/how-sender-verification-and-click-tracking-work/): Learn what each DNS record gates and how the checks run.
* [How emails work](https://releva.ai/documentation/learn/emails/how-emails-work/): Learn how campaigns and workflows send your emails.
* [Create a one-off email campaign](https://releva.ai/documentation/guides/campaigns/create-a-one-off-email-campaign/): Send your first email from your verified sender.
* [Choose how Releva manages subscriptions](https://releva.ai/documentation/guides/consent/choose-how-releva-manages-subscriptions/): Decide who manages opt-ins and which subscriptions your customers see.