# Send an SMS with a workflow

> Open a saved SMS under Marketing Channels › SMS / Text Messages, select Send, and start a one-off, continuous or triggered workflow with the SMS already connected to Start, or add it to an existing workflow.

A saved SMS does not go anywhere by itself. It is sent by a **workflow** that decides who receives it and when. This guide starts from the SMS and opens the workflow editor with the SMS already in it. It stops where the workflow editor begins: nothing is sent until you set the audience and launch the workflow there. For what happens at send time, read [How SMS work](https://releva.ai/documentation/learn/sms/how-sms-work/).

## Before you start

* A saved SMS. See [Create an SMS](https://releva.ai/documentation/guides/sms/create-an-sms/).
* An SMS provider under **Settings › Messaging**, tab **Text Messages**. A workflow can be built without one, but no SMS is sent until it is set up.
* Profiles with a phone number who are subscribed. SMS go only to subscribed profiles with a phone number; see [How consent works in Releva](https://releva.ai/documentation/learn/consent/how-consent-works-in-releva/).
* You know which kind of workflow you need: one send to an audience (**One Off**), a send to everyone who enters an audience over time (**Continuous**), or a send in reaction to an event such as an order (**Triggered**).

## Steps

1. Go to **Marketing Channels › SMS / Text Messages**.

   Each saved SMS has a card with its results for the selected period: **Sent**, **Delivered**, **Clicks**, **Conversions**, **Purchases**, **Revenue**, **Unsubscribes** and **Bounces**.

   ![Step 1](https://releva.ai/documentation/_astro/step-1.tdBph2nx_Z1pKqaa.webp)

2. Select the name of the SMS you want to send, for example **Demo spring sale SMS**.

   The edit page opens with the breadcrumb **Home / Text Messages / \<name> / Edit**.

   ![Step 2](https://releva.ai/documentation/_astro/step-2.uscoybQW_1Jv1qE.webp)

3. Select **Send**.

   **Send** is next to **Save** at the bottom of the form. It does not send anything by itself: it opens a window where you choose a workflow.

   ![Step 3](https://releva.ai/documentation/_astro/step-3.Dgftw81y_Z7rjDA.webp)

4. The **How would you like to send your SMS / Text Message?** window opens. SMS are sent through workflows.

   The window has one tab, **Workflow**. Unlike emails, an SMS cannot be put into a campaign from here.

   ![Step 4](https://releva.ai/documentation/_astro/step-4.DRj7hrKJ_Z6c3dH.webp)

5. Select **Create New Workflow**. To add the SMS to a workflow you already have, select **Use Existing Workflow** instead.

   **Use Existing Workflow** lists your workflows with a **Filter workflows…** box. **Create New Workflow** asks *What type of workflow do you want to create:*.

   ![Step 5](https://releva.ai/documentation/_astro/step-5.DGxT0qC8_Z1tiMsx.webp)

6. Choose **One Off Workflow**, **Continuous Workflow** or **Triggered Workflow**. The workflow editor opens with your SMS already connected to **Start**.

   The editor opens as a new workflow named **New workflow**, with tabs **Content**, **Audience**, **Launch Configuration** and **Goal**. Set the audience and the launch settings there, then save and launch the workflow. Until you launch it, no SMS is sent.

   ![Step 6](https://releva.ai/documentation/_astro/step-6.TZ55iIn2_C3YgW.webp)

## Check it worked

* The workflow editor shows your SMS as a step connected to **Start**, and the page title reads **New workflow**.
* After you launch the workflow and the first send runs, the SMS card on **Marketing Channels › SMS / Text Messages** shows **Sent** greater than **0** for the selected period, and **Statistics** on the card opens a daily chart.

## Troubleshooting

**Send is missing on the form.** You are on a new, unsaved SMS. Select **Save** first; the confirmation then offers **Send it**, and **Send** appears on the edit page.

**The window shows only “Workflow”.** That is expected: SMS are sent through workflows only.

**Sent stays at 0 after the workflow ran.** Check that the shop has an SMS provider (**Settings › Messaging**, tab **Text Messages**), that the audience contains subscribed profiles with a phone number, and that the workflow is launched, not just saved, and that the click-tracking DNS record for your sender domain is in place (**Settings › Messaging**, tab **General**, section **Click Tracking**). The workflow editor warns *Campaign sending is disabled until the click-tracking DNS record is in place for your sender domain* while it is missing, and Releva then refuses to send the SMS at all, because every link in it goes through that host. Profiles whose number bounced before are left out, and profiles over the daily limit are rescheduled or skipped according to the setting on the SMS. See [How SMS work](https://releva.ai/documentation/learn/sms/how-sms-work/#who-receives-an-sms).

**The workflow editor shows an error instead of the canvas.** The editor loads settings for every channel, so a broken integration on another channel (for example an expired Facebook token) can block it. Fix or disconnect that integration under **Settings** and open the workflow again.

## Other channels in a workflow

The workflow that sends your SMS can also send other channels. Each one is a step in the left panel of the workflow editor:

* **Email**: Sends a saved email. See [Edit an HTML email](https://releva.ai/documentation/guides/emails/edit-an-html-email/).
* **Push**: Sends a saved web or app push notification. See [Send a push notification with a workflow](https://releva.ai/documentation/guides/push-notifications/send-a-push-notification-with-a-workflow/).
* **Viber**: Sends a saved Viber message. See [Create a Viber message](https://releva.ai/documentation/guides/viber/create-a-viber-message/).
* **WhatsApp**: Sends a saved WhatsApp template. See [Send a WhatsApp template with a workflow](https://releva.ai/documentation/guides/whatsapp/send-a-whatsapp-template-with-a-workflow/).
* **Text**: Sends a saved SMS.
* **Facebook**: Adds the profiles to a Facebook ad audience. See [Create a Facebook ad](https://releva.ai/documentation/guides/facebook-ads/create-a-facebook-ad/).
* **Google**: Adds the profiles to a Google asset group for the membership duration you set. Continuous workflows only.
* **Webhook**: Calls a saved webhook for each profile. See [Create a webhook](https://releva.ai/documentation/guides/webhooks/create-a-webhook/).

## Next steps

* [Create an SMS](https://releva.ai/documentation/guides/sms/create-an-sms/): Write another message with merge tags and check its length.
* [How SMS work](https://releva.ai/documentation/learn/sms/how-sms-work/): Learn who receives an SMS, how links are shortened and what the daily limit does.
* [How consent works in Releva](https://releva.ai/documentation/learn/consent/how-consent-works-in-releva/): See which customers have opted in to receive your messages.
* [Create a segment](https://releva.ai/documentation/guides/segments/create-a-segment/): Build the group of customers your workflow sends to.