# Turn a segment sync on or off

> Use the switch on a sync's card under Data Platform › Sync Segments to pause or resume updates to the audience on the ad platform.

Every segment sync has an On/Off switch on its card. **Off** stops Releva from updating the audience on Facebook or Google. The audience itself stays on the platform with the profiles it already has. **On** lets the next scheduled run update it again.

## Before you start

* You know the name of the sync. The list shows ten syncs per page; use the search field to find one.
* For a Facebook sync with a lookalike audience or a custom ad account, do not use the switch until the issue described in Troubleshooting is fixed. Open the sync’s details page instead and ask your Releva contact.

## Steps

1. Go to **Data Platform › Sync Segments**.

   Each card shows the sync’s name, its segment, the platform (**Google** or **Facebook**) and the On/Off switch.

   ![Step 1](https://releva.ai/documentation/_astro/step-1.C8lkIsTl_1yIt0S.webp)

2. In **Search here…**, type the name of the sync.

   The list filters as you type. Search matches whole words anywhere in the name and the start of the last word, so `repeat` and `to google` both find “Repeat buyers to Google”.

   ![Step 2](https://releva.ai/documentation/_astro/step-2.DTYfgUk7_9DCtb.webp)

3. On the sync’s card, select the switch to turn the sync off.

   There is no confirmation. The change is saved immediately.

   ![Step 3](https://releva.ai/documentation/_astro/step-3.TsGTkgoN_ZMXYC8.webp)

4. The switch shows the sync is off. Select it again to turn the sync back on.

   Right after the change, the segment badge on the card can read **Unknown** (see Troubleshooting).

   ![Step 4](https://releva.ai/documentation/_astro/step-4.ChwYgCOd_ms2h6.webp)

## Check it worked

* The switch on the card is grey (off) or purple (on).
* Reload the page: the switch keeps its new state. You can also set the **On / Off** filter at the top of the page to **Off** to list only paused syncs.

## Troubleshooting

**The segment badge reads “Unknown” right after I used the switch.** This is a display quirk. The response that updates the card does not include the segment name. Reload the page and the segment name is back.

**I turned the sync back on but nothing synced.** Changing only the switch does not start a sync. The audience is updated on the next scheduled run (by default once a day at midnight UTC). A sync starts immediately only when you create it.

**A Facebook sync lost its lookalike or ad-account settings after I used the switch.** Known issue: the switch sends only the on/off state, and the update clears the lookalike type, ratio and ad account of a Facebook sync. Open the sync’s details page and check the settings. Report it to your Releva contact if the settings are gone.

## Next steps

* [Sync a segment to Google or Facebook](https://releva.ai/documentation/guides/sync-segments/sync-a-segment-to-google-or-facebook/): Create another sync that pushes a behavior segment and keeps it up to date.
* [Delete a segment sync](https://releva.ai/documentation/guides/sync-segments/delete-a-segment-sync/): Remove a sync you no longer need and see what happens to its audience.
* [How segment syncs work](https://releva.ai/documentation/learn/sync-segments/how-segment-syncs-work/): Learn when Releva pushes profiles and what the lookalike options mean.